Cuei 8mm x 10mm Longboard Skateboard Bearing Spacers

Click photo to enlarge
Choose Variation
$14.95 USD
Description

Add Cuei Longboard Bearing Spacers to your Cuei longboard wheels!

Adding spacers in between your bearings will align the bearing to the inner hub of your wheel. This will effectively reduce friction and movement inside the hub of the bearing. With spacers installed, the energy between turns is absorbed by the wheel and not the bearing itself, reducing impact and side load on the be bearing itself.

Reducing stress on your bearing components will help prevent your bearings from exploding or seizing up while riding your longboard. In addition to stress reduction, adding spacers will hold your wheels steady on your trucks during slides, preventing that annoying and sometimes dangerous choppiness experienced when sliding square-lipped wheels. Ultimately, you will have a bearing that will endure the demands of a downhill racer or freerider.

If you are doing any Racing, Downhill, Freeride, and especially Slides and hard carves, you will want to add Bearing Spacers to your Longboard Skateboard.

One pack is enough for 4 wheels

NOTE: 8mm x 10mm spacers will fit almost all standard longboard wheels. If you are using 10mm axle trucks, you will need different spacers!

Cuei Wheels's Description

The Cuei Wheels precision spacers were created due to the lack of precision in the parts that we find for this purpose in the market and due to the lack of an universal measure of the space between the bearings in the wheel cores. Our spacer is made with micrometra precision, which is above of the normally used measurement, millimeter. They are made to the exact measure of our core, with a perfect fit, which makes this piece unique and makes every movement between the truck, wheel and bearings simultaneous. This improves the slide making it smoother, without chatter, vibration and besides zeroing the loss of energy in straight lines, which results in higher speed. In addition they undergo a painting process called anodizing, which makes our spacer immune to oxidation and increases its resistance so the part is extremely durable. Created and made in Brazil, with a partnership between Cuei Wheels and Dan Hill, available now in the colors green and orange.

Reviews

No reviews have been written for this product.