MuirSkate Beasto 8mm x 10mm Silver Longboard Skateboard Bearing Spacers

Click photo to enlarge
(1 review)
$3.95 USD

We believe that Bearing Spacers should be used on every complete, no matter what type of riding the board will be used for.

Adding spacers in between your bearings will align the bearing to the inner hub of your wheel. This will effectively reduce friction and movement inside the hub of the bearing causing the energy between turns is absorbed by the wheel and not the bearing itself. This reduces impact and side load on the be bearing.

Reducing stress on your bearing components will help prevent your bearings from exploding or seizing up while riding your longboard. In addition to stress reduction, adding spacers will hold your wheels steady on your trucks during slides, removing that rattling noise you hear while rolling, as well as preventing that annoying and sometimes dangerous choppiness experienced when sliding.

Ultimately, you will have a bearing that will endure the demands of a downhill racer or freerider.

One pack is enough for 4 wheels.

NOTE: 8mm x 10mm spacers will fit almost all standard longboard wheels. If you are using 10mm axle trucks, you will need different spacers!


Normal eye
just get em
on 2016-08-16 Verified Purchase
bearing spaces are great for your wheels/bearings make sure you dont skip out on these.