Array Machined Barrel Cupped Washer Combo Pack - Four Pack

Click photo to enlarge
(2 reviews)
Choose Variation
$29.95 USD

The Array washers are some of the raddest innovations we've seen come from of the longboarding industry as of late. These 303 machined stainless steel washers that sit on the barrel bushings of your choice and stays right where it's meant to be while keeping the bushing engaged and running at it's full, responsive potential. "Normal" flat and cupped washers move back and forth against the kingpin when you're turning hard, pumping and putting force on the trucks. Over time this can cause problems (such as broken kingpins) if you're not careful. Array machined washer sit snug against the kingpin and ensures the truck moves as one system, not a bunch of pieces of metal and urethane moving against one another.
We were lucky enough to try these washers out before the hit our shelves and we are stoked to say the least. The response we're getting from our bushings is much better than it is using a standard flat washer. Throw these on your trucks with your bushings of choice and you'll be swearing you're on some precision trucks. Shoot, imagine putting these washers ON PRECISION'S. That'd be like a double precision. Your friends will be jealous. Keep your eyes on that board!

Cupped Washer Dimensions:
Outer Diameter - 28.65mm
Inner Diameter - 9.5mm
Thickness - 1.4mm
Height - 4.1mm

Read below for the installation process!

Array's Description

At Griffin Skateboards, we have noticed there is a problem with the standard washer cups on all stock skateboard trucks today. People are snapping their kingpins on their trucks left and right. The grade 8 washer and grade 8 kingpin in combination with bushings that are too soft are hanging up the kingpin and snapping it. Old, traditional washer cups surf around on the bushing and on the kingpin too much. It's about time we have a state of the art washer that works to help the rider be safe. We have been working on solving this problem since 2009 We believe we have the solution: The Array washer cups! We have already sent some to our best customers with an excellent response.

Why Are These Better?
Array washer cups where the first machined gripped washer cup system for the skateboard truck. The patented Array machined rings give's the washer more grip on the bushing, king pin and the baseplate. This system will work on all stock skateboard trucks in the market along with CNC, LDP, slalom, and downhill, street trucks. Array washer system wants you be able to adjust your trucks in the best way, using our washer system. Array washer cups will add a higher level of performance for your skateboard trucks
How do I install them?

Take a king pin point it down on the head, add your Array cup washer slide the bushing on the washer and press down on the bushing on a table or hard surface. Adding to a truck take a truck base plate with a king pin installed, add the Array cup washer and a bushing add the hanger and press down on the hanger and hold on the base plate on a table or hard surface. Top bushing add the bushing to the hanger and king pin then the Array cup washer add the nut and tighten down. Note on harder bushing will pop out if not held down by a nut if brand new and can be harder to install than softer bushing.


Quality Product
on 2020-03-12 Verified Purchase
To be used on a quad skate setup for some OG gear you really can't get parts for. As a solution, it's better than the original bits. Can't go wrong no matter what you use these for.
Normal img 4649
Premium Price
on 2016-10-24 Verified Purchase
But still premium! I've never paid so much for a piece of stainless steel so small but man can you feel the difference! If your trucks come with cruddy washers get some of these; I hear Amish washers are good but my experience on these is excellent to say the least.