Venom HPF Double Barrel Longboard Skateboard Bushings Pack

Description

Note: "Quantity: 1" is enough for one truck. Buy TWO (2) packs for your complete longboard! White and Grey color bushings may come with a variation in the color. White bushings are affected by light that might cause discoloration.

Double Note: Purchasing a Venom HPF Bushing Pack "w/ Washers" means you're getting two (2) Large Cupped washers and two (2) Flat washer along with your bushings.

Why must I need washers? Because the washer gives the bushing some support. If you were to run flat washers all around (or no washers) then the bushing wouldn't be bouncing back as much as you would hope. A cup on the bottom allows for a nice rebound, while a flat on top allows for a nice lean.

We want to help you choose your bushing for your body weight! So here's a mini cheat sheet to get you started:
50-100 lbs: 73-80a
75-125 lbs: 78-82a
100-145 lbs: 80-85a
125-175 lbs: 80-87a
145-195 lbs: 82-90a
175-220 lbs: 85-93a
200-250 lbs: 90-93a
225 lbs and up: 90-97a

Venom High Performance Formula Longboard Skateboard Bushing Packs are used for downhill, carving, and cruising. If your intention is only carving and cruising, you should consider Venom Standard Bushing Packs or Venom Super Carve Packs. They both make use of a cone style bushing to give you some extra carve!

Venom HPF Barrel bushings are considered the highest quality bushings by experienced downhill riders and Longboard enthusiasts. If you have not tried a Venoms on your Racing board or Cruising longboard, you have not yet felt a rebounding truck. These bushings compress and release to perfect center. Choose your durometer carefully. Don't just purchase the bushing because the color matches your skateboard. You should consider your weight and board shape carefully before ordering your bushings. Call us if you need additional assistance!

DIMENSIONS:
Height: ~15.53mm
Outer Diameter: ~25.10mm
Inner Diameter: ~9.34mm

Venom's Description

Plain and simple, the Downhill (HPF) Pack is built for speed. Double barrels, teamed with cup washers can give your setup that fully locked in feel that gives you the confidence you need to grab some serious velocity. Barrels: .6″ tall x .97″ wide

Formulas:
High Performance (HPF): The original Venom High Performance formula is the most trusted and tested formula used by the world’s top downhill racers. A perfect blend of rebound and dampening to keep you stable at high speeds and hook up with control out of corners.

Reviews

By Eric on 2021-03-24 Verified Purchase

Great bushings. Can't go wrong with venom

Nyoom in Savants

By Oliver Schumacher on 2021-03-21 Verified Purchase

Throw these in Paris savants and suddenly you're breaking 50 with a decent tuck wondering why you ever rode stock bushings

Feel great, 5 stars

By Qamden on 2020-12-20 Verified Purchase

Really fair price, much better than the stock caliber bushings

Great!

By Daniel Terry on 2020-08-24 Verified Purchase

Awesome bushings! Very responsive. Made my board feel like a whole new board!

Nice

By Glenn on 2020-08-24 Verified Purchase

These are nice they return to center great and because I’m A bigger skater I have to mention that they work well on turns despite being 230+ I use them in my back truck with a double barrel board side and A hardcore black cone bushing for the front and double barrel board side on that one.

Longboard go zoom

By Elisey on 2020-08-12 Verified Purchase

Hot, really nice.

95a

By timo on 2020-06-24 Verified Purchase

These are some stiff bushings--good control without over tightening

Venom is the goat

By Shane Hoffman on 2020-06-21 Verified Purchase

Great quality bushings

These look great and perform excellent!

By Carl on 2020-06-08 Verified Purchase

Threw them on the board and they were perfect. Excellent quality, and the washers were perfectly matched. I was only able to use the one cupped washer though, not enough space for the truck side one on top and bottom.

tried and true

By longshotzen on 2020-04-14 Verified Purchase

I love how long these bushing last me, before they start to lose rebound.

excellent product

By jhon j villegas g / W on 2018-09-08 Verified Purchase

Always, I buy with the store I get surprises, I love the stickers they send me.

excellent rebound

By HSP-SD on 2017-02-19

Have been playing around with bushings lately - decided on venom 90a boardside, 86a RAD roadside / both barrels for freeride and carving hard. The Venoms have excellent rebound and a lively feel boardside while the RAD urethane have a sort of linear feel / they work well together. Get some different bushings from MuirSkate and get your setup dialed.

No brainer

By Sean-Elsey on 2017-01-24 Verified Purchase

Venom is Venom, and venom is good.

Excellent

By Outdoorstud on 2016-08-20 Verified Purchase

For the price to performance venom bushings are incredible. I'm definitely returning to these for next purchases.

Its Venom

By Swamp on 2016-08-16 Verified Purchase

You know these things kill it why are reading reviews?

Better than stock

By blargh on 2016-06-25 Verified Purchase

I like them better than the stock bushings that come on Bear trucks.

Only barrel I'll ever use.

By Jay Cremer on 2016-01-14 Verified Purchase

I've used these and the Khiro barrels and these are the only ones i keep coming back to. They have a perfect feel and rebound to them!

Big Ups

By Markage on 2015-11-30 Verified Purchase

Consistent springback and predictable action. Awesome upgrade from the stock Caliber standard setup.

Normal 12250525 1522530748064932 1362399865 o

Favourite Bushings

By Simon Kurkimaki on 2015-11-28 Verified Purchase

If I could give these a 4/5 I would for sure. These are the only bushings I ride on any set up, 90A+ for smooth downhill, and then 87A for some freeriding. They are super responsive and last a long time. I couldn't say anything that I don't like about them because I really don't have any complaints.

Excellent

By saxon9598 on 2015-09-17 Verified Purchase

Excellent bushings, Im a big rider, 6 feet tall 220lbs, I use different combinations of the pink or white bushings board side and a soft bushing on the road side. Boards are responsive and carvy, yet stable on the fast straightaways. Use paraffin candle wax to keep the bushings from squealing, especially the harder duros, they can be really loud! My dropspeed is stable at speeds but turns smooth and predictably I have it set up with Bear trucks, Glow in the dark board side and yellow road side. My Arbor Deck is set up with Caliber II's, pink bushing deck side, stock bushing road side. Board carves and dives in a pleasing, controlled and predictable manner, while still being stable at 23 MPH. On my Pinner with bear trucks I use a Green bushing board side, and an orange bushing road side in the back and a yellow bushing road side front. The board carves and rolls smooth and effortlessly. Hope this helps you big guys.