Venom HPF Double Barrel "Mini Sack" Longboard Skateboard Bushings with Washers

Click photo to enlarge
(8 reviews)
Choose Variation
$24.95 USD

Each Venom High Performance Formula Double Barrel Bushing Kit includes:

6 Assorted HPF Double Barrel Bushings
4 Large Cup Washers
2 Flat Washers

Why must I need washers? Because the washer gives the bushing some support. If you were to run flat washers all around (or no washers) then the bushing wouldn't be bouncing back as much as you would hope. A cup on the bottom allows for a nice rebound, while a flat on top allows for a nice lean.

We want to help you choose your bushing for your body weight! So here's a mini cheat sheet to get you started:
50-100 lbs: 73-80a
75-125 lbs: 78-82a
100-145 lbs: 80-85a
125-175 lbs: 80-87a
145-195 lbs: 82-90a
175-220 lbs: 85-93a
200-250 lbs: 90-93a
225 lbs and up: 90-97a

Venom HPF Double Barrel Bushings are used for downhill, freeride, carving and cruising. If your intent is only carving and cruising, you should consider Venom Standards or Venom Super Carves.

Venom bushings are considered the highest quality bushings by experienced downhill riders and Longboard enthusiasts. If you have not tried a Venoms on your Racing board or Cruising longboard, you have not yet felt a rebounding truck. These bushings compress and release to perfect center. Choose your durometer carefully. Don't just purchase the bushing because the color matches your skateboard. You should consider your weight and board shape carefully before ordering your bushings. Call us if you need additional assistance.

Height: ~15.53mm
Outer Diameter: ~25.10mm
Inner Diameter: ~9.34mm

Venom's Description

Plain and simple, the Downhill (HPF) Pack is built for speed. Double barrels, teamed with cup washers can give your setup that fully locked in feel that gives you the confidence you need to grab some serious velocity. Barrels: .6″ tall x .97″ wide

High Performance (HPF): The original Venom High Performance formula is the most trusted and tested formula used by the world’s top downhill racers. A perfect blend of rebound and dampening to keep you stable at high speeds and hook up with control out of corners.


Hardest is so hard
on 2021-05-17 Verified Purchase
These are wicked hard and made my board feel like a whole new set up:
Normal 147d5a73 2dc0 4a1e 98cb ecbccf41e866
Consistently great
on 2020-04-11 Verified Purchase
I always know what to expect from Venom bushings. They are super easy to set up. I’m 170 lbs and have 85/81 on my Zenit Marble 40 and 87’s on my downhill board. These for perfectly with Paris trucks, and they are a really tight fit with Randal RII hangars. I highly recommend taking advantage of the washer customization options, as they can really change the feel of the bushings in a positive way. My order came with 4 flat and 4 cupped washers, which may have been an accident (see image). Regardless, the extra washers allowed me to perfect 2 setups.
Normal 20160701 054856
I like em so far
on 2017-03-06 Verified Purchase
I got the new glode maiden and it was a bit too soft on hard leans. Nice to have the thick cup washers and flats too. Helped with wheel bite with harder barrels roadside softer board side. Feels good wish I would have gotten a stiffer kit.
Love them
on 2016-08-29 Verified Purchase
These bushing are so nice for downhill!! I bomb a steep ass hill I went 30mph easily nice and stable and had a lot of control.
Normal capture1
Fine Tuning Options
on 2016-08-13 Verified Purchase
I weigh a lot and this bushing upgrade made a huge difference for me. As my skills and speeds creep up I find firmer bushings to be a great confidence builder. On my top mount I currently run 95/93 in the back and 93/90 in the front. Probably more complicated than needed but I split the bushings up for another board. I may try the 97s but will probably save them for bigger roads. I am still fine tuning and I am sure there is a better way but there you go. I found that the bushings needed breaking in a bit so be ready for that if they feel stiff at first. I stood on the board with loose trucks and cranked back and forth 40 times or so and that helped a bunch. Then I tightend the bolts a little. I had to push pretty hard to get these on my Bear 852's but I got them on. I shaved off some of the molding on the 95a's as it was flaring out of the intended shape. just a tiny bit off the edges No big deal. They fit fine on my Caliber_II's fine.
Normal image
Superior to all other bushings
on 2016-01-02 Verified Purchase
High quality urethane for a excellent setup for an excellent price. It lets you experiment with uneven bushing setups with different washers too. Great overall buy!
That shit you need
on 2015-10-25 Verified Purchase
The ultimate bushing pack for your 160-180 ass. Play around with it.
Normal img 2576
Venom products are great.
on 2015-08-27 Verified Purchase
I don't like how it has so many washers but everything else was great, I love venom